L.O.A. 46’ 2”
L.W.L. 41’ 8 ½”
BEAM 11’ 6” Over the Rails
DRAFT 2’ 5” board up / 5’ 7” board down
DISPL. 11,500 lbs. approximately
BALLAST 4,000 lbs. lead
TYPE Shoal-bodied centerboard Motorsailer
RIG Marconi Cutter with roller-furling headsails
POWER Yanmar 4BY3-180 diesel w/ 2.5::1 reduction gear
SAIL AREA 827 square feet
SA TO D 25.97
TANKAGE 219 gal Fuel; 219 gal water; 40gal waste
ACCOMODATIONS Two in Aft Cabin; two in V-Berth; two on Settees
SPEED CALCULATIONS Hull Speed: 8.65 knots; Cruising Speed 8.5 knots @ 1 gph fuel consumption; 12 knots @ 2 gph; Maximum Speed 15 knots
CONSTRUCTION Cold molded lapstrake 7/8” marine plywood/epoxy/fabric. Decks ½” marine ply over sawn beams. Coachroof—Foam core/ply sandwich. Covering system—epoxy impregnated Xynole-polyester fabric finished with linear polyurethane paint systems. Spars—Hollow box-section construction. Interior—painted ply trimmed with varnished hardwoods.
Complete plans include the construction manual THE NEW COLD MOLDED BOATBUILDING, Construction Drawings and Construction Notes.
