L.O.A. 32’ 6”
L.W.L. 31’ 6”
BEAM 8’ 3” over the rails
DRAFT 10 ½”
DISPLACEMENT 4,500 lbs, approx – 5,000 lbs with tanks half full.
TYPE Single-chine plywood power cruiser; outboard powered. The vessel is intended for semi-protected waters, coastal waters, with trips to Cuba and the Bahamas possible during settled weather. The vessel is light, narrow and easily-driven, making her both fast and fuel-efficient.
POWER 90 to 115 hp 4-stroke outboard or twin Yanmar 3JH40 inboard diesels
CONSTRUCTION Cold-molded marine plywood/epoxy, covered with epoxy-impregnated Xynole-polyester cloth. The hull is built around longitudinals spanning ½” ply bulkheads, greatly simplifying lofting and construction. Bottom: double-diagonal 3/8”; sides: one layer 1/2”; decks: foam-core/ply sandwich; twin 3/8” ply web frames fore & aft. Cockpit and lockers are self-draining.
PLANS Full construction plans include The New Cold-Molded Boatbuilding, Construction Notes and Construction Details, plus an illustrated Construction Manual.
CAPACITIES Fuel: 100 gal. (plastic tank). Water: 100 gal. (P & S in integral tanks). Holding: 25 gal. black water.
DESIGNER Reuel B. Parker NOTE This boat is intended to be extremely fuel-efficient and environmentally friendly
