Sharpie 24 Ohio



This has been one of the most popular design in The Sharpie Book. She is basically a one-half-size model of the large 36’ Ohio Pound Net Sharpie. Shown in the photo is my own “Gato Negro” which I built in Islamorada, Florida, about 1989. The vessel is an excellent performer, being a fast sailor with fine balance, yet capable of carrying an easy 1,000 lbs payload. I spent idyllic days sailing her on the flats of the Florida Keys, slipping along in scant inches of water, steering by shifting my weight slightly while sitting on the bridge deck without tending sheets or tiller!

The Sharpie 19 Design (see the Sharpie Stock Plans List for price) is more traditional and both lighter and finer than “Gato Negro”, which was designed as a work boat. I have drawn two rigs for the model: one is a sprit-rigged cat ketch, with spar dimensions the same as “Gato Negro’s”, and the other is my reconstruction of a sloop-rigged Pound Net Boat, which I imagine may resemble the rig used in the small Ohio sharpies. This particular boat is also very simple to build, and represents an excellent model for the beginner.

I had also designed a 24′ Ohio Sharpie pocket cruiser, but did not publish or sell the plans for many years. They are now listed in The Sharpie Catalogue and on the Prices Page. The 24′ model can be built either as an open boat, or with a cabin and simple beach-cruising interior


 24′ 3″
19′ 9″
7’ 0” 
 1′ 0″/3′ 4″
2,500 lbs. (approx)
2,000 lbs. (approx)
 800 lbs.
Ohio Sharpie
Oars/Outboard in well
245 sq. ft.
Marconi Ketch
Marine plywood covered with epoxy-saturated Xynole-polyester fabric. The hull is frameless, being built over bulkheads.
Full plans include our manual, The Sharpie Book, Construction Drawings and Notes.


There are no reviews yet.

Be the first to review “Sharpie 24 Ohio”

Your email address will not be published.