Scow 33 Traditional Gaff rigged version

Description

L.O.D                              32’

L.W.L                              28’

L.O.A                              33’ 6”

L.EXT.                            43’ 2”

BEAM                             11’ 9”

DRAFT                            2’ 3 ½” Board up  6’ 6 ½” Board down

SAIL AREA                     872 sq. ft. Gaff Rig/830 sq. ft. Junk Rig

DISPLACEMENT          Approx. 24,000 lbs.

BALLAST                        Approx. 8,000 lbs.

RIG                                   Gaff-tops’l Sloop/Junk Sloop

POWER                           Four-cycle outboard in well or Diesel auxiliary

TYPE                                Gulf Coast scow—Sailing houseboat

ACCOMMODATIONS        Two plus a child; settee sleeps one or two with convertible table

CONSTRUCTION             QUICK-MOLDED plywood/epoxy/fabric. Bottom double-diagonal laminated using full sheets of 21/32” yellow pine or Douglas fir ACX/marine ply; Topsides and deck—one layer of same with butt blocks; Sawn beams of fir or yellow pine.  Douglas fir spars. All exterior surfaces coated with epoxy-impregnated Xynole-polyester fabric. Paint systems use epoxy primers and linear polyurethane finishes.

OPTIONS                        This hull model can also be built as a power boat, with or

without a small pilot house, or as a Chinese junk. Options consist of custom design work to each clients’ specifications unless pre-existing.

NOTE                              WE CONSIDER THIS DESIGN TO EMBODY THE MOST BOAT POSSIBLE FOR THE MONEY!!