Motorsailer 46

L.O.A.                    46’ 2”

L.W.L.                    41’ 8 ½”

BEAM                    11’ 6” Over the Rails

DRAFT                  2’ 5” board up / 5’ 7” board down

DISPL.                   11,500 lbs. approximately

BALLAST                4,000 lbs. lead

TYPE                      Shoal-bodied centerboard Motorsailer

RIG                       Marconi Cutter with roller-furling headsails

POWER                  Yanmar 4BY3-180 diesel w/ 2.5::1 reduction gear

SAIL AREA             827 square feet

SA TO D                25.97

TANKAGE              219 gal Fuel; 219 gal water; 40gal waste

ACCOMODATIONS           Two in Aft Cabin; two in V-Berth; two on Settees

SPEED CALCULATIONS   Hull Speed: 8.65 knots; Cruising Speed 8.5 knots @ 1 gph fuel consumption; 12 knots @ 2 gph; Maximum Speed 15 knots

CONSTRUCTION    Cold molded lapstrake 7/8” marine plywood/epoxy/fabric. Decks ½” marine ply over sawn beams. Coachroof—Foam core/ply sandwich. Covering system—epoxy impregnated Xynole-polyester fabric finished with linear polyurethane paint systems. Spars—Hollow box-section construction. Interior—painted ply trimmed with varnished hardwoods.

Complete plans include the construction manual THE NEW COLD MOLDED BOATBUILDING, Construction Drawings and Construction Notes.